Corpusfishing.com

[Dink]

QTY 2 - Boat Seats with 90 Qt. Igloo Cooler Seats & Flip Backs - Never Used

A Bargain for $150 for both!
* Text 956-429-105three

Brand New these Boat Seats cost over $400 each!
That's $800 Total!
These Igloo 90 Quart Marine Coolers are worth what I'm asking.

Link to Ad and Photos: http://mcallen.en.craigslist.org/spo/3212418686.html

I have 2 of these Flip Back Cooler Boat Seats with Cooler Seats & Flip Backs. I found these in my dusty storage shed. I'm guessing they are 6-8 years old. I asked my wife and she said they had been bought by her ex to put into a boat he was rebuilding, but the boat rebuild fell through. She said, "SELL THEM". It appears that they have never been used or mounted in a boat. No screw holes in the bottom of the seat mounts, etc.

They do need a GOOD Cleaning. I spent 15 minutes doing a quick wash with just a rag and was able to clean the marine vinyl pretty easy. I'm sure these will clean up with some bleach and good soap!

"Flip Back" means you can flip this seat so it can be sit down on from either direction. Which is very handy and useful.

Both of the coolers are Igloo 90 Quart Sport Coolers. Very thick. They are unused, as the Igloo paperwork is still inside both.

The only problem I found, besides the dirt, was when I moved one coolers. One of the cushioned tops came loose. I took photos so you can see. The stainless steel screws can be seen poking out of the cooler top. The easiest way to repair this is to buy a 1/2 piece of treated plywood at Lowe's and cut it to fit inside the cushion top. Buy some good wood glue and a few short stainless screws. Mount the two plywood back into the top with a good dose of wood glue and the screws. Let dry over night. The next day. Remove the screws from the top of the cooler. Put the repair top on it. Put the screws back in through the top of the cooler into the new wood. Don't over tighten. Add a couple of dabs of silicon to seal the screw head and the cooler. Done.

Dimensions are Width of Seat Mount on Floor 42", Height 34", Length of front to back of seat mount 22.5"

I don't want to split these seats. Sorry, this is a really good deal...

If you want more photos, please text me. I'd be happy to.

I can meet half to deliver these.

[Dink]

Sold! Thanks.